DENON PMA-890D AMPLIFIER black

Details

Form Digital multi-interface loading Integrated Amplifier

SP terminal)>

Output power (20Hz - 20kHz) 130W+130W (6ohms) 

110W+110W (8ohms)

Input sensitivity/impedance CD input: 150mV/30kohm

THD 0.004% (20Hz - 20kHz, 55W, 8ohm)

Dynamic power 350W (2ohms) 

275W (4ohms) 

170W (8ohms)

TIM distortion Below measurement full limits

Output bandwidth 5Hz - 100kHz (Output 55W, 0.5%, 8ohms)

Line-in frequency response 4Hz - 150kHz, and +0 -3 dB (outputs 1W and 8ohm)

Output load impedance 0.1ohm or less

Output terminal Speaker: AorB:6-16ohm, A+B:12-16ohm 

Headset-jack maximum except take-off: 430mW (8ohms), 8-400-ohm conformity

A digital-input/output level / impedance 0.5 Vp-p/75ohm same axle 

Standard light input: Two lines

Frequency response (0dB) 5Hz-20kHz±0.3dB

Signal to noise ratio (dB for zero, 1kHz) 105dB

Dynamic range (1kHz) 100dB

THD (0dB, 1kHz) 0.0025%

Input sensitivity/impedance Phono MM: 2.5mV/47kohm 

Phono MC: 0.2mV/100 ohms 

CD, AUX, Tuner, Tape1, 2PB:150mV/30kohm

The maximum except take-off/Output power 8V/150mV

THD 0.002% (MM, 1kHz, 8V)

Equalizer (RIAA) deflection 20Hz-50kHz±0.3dB (MC IN)

Signal to noise ratio 

(an input short circuit, the auditory sensation weighting A) Phono MM:82dB 

Phono MC: 62dB (at the time of a 0.25mV input) 

Line:108dB

Tone control characteristic Bass: ±8dB (100Hz) 

Treble: ±8dB (10kHz)

Subsonic Filter 16Hz, -12 dB/oct

Loudness control characteristic 100Hz:+6dB 

10kHz:+6dB

Muting switch -20dB

Power consumption

(Electrical Appliance and Material Control Law) 216W

Power source AC100V, 50Hz/60Hz

Dimensions 

(Includeds, such as a foot, a knob, and a terminal) PMA-890D: Width 434x height 180x depth of 420mm 

PMA-890DG: Width 470x height 181x depth of 420mm

Weight PMA-890D:18kg 

PMA-890DG:19.4kg